Thermoforming Plastic:
Process, Types & Custom Case Applications

Note: Thermoforming refers to heating and shaping rigid plastic sheets and is often mistakenly confused with the compression molding process used for EVA cases.
START YOUR DESIGN
Thermoforming process using vacuum forming to shape rigid plastic sheets

What is Thermoforming?

Thermoforming is a process in which thermoplastic sheets or tubes are heated to a pliable state and then shaped into finished products using molds or fixtures. The shaping is achieved through gas pressure, liquid pressure, or mechanical force, allowing the material to form within its high-elasticity temperature range.

Thermoforming Process in Plastic Case Manufacturing

Thermoforming is generally classified into 2 main types: vacuum forming and pressure forming.

Heating

Load the plastic sheet into the heating station and heat it evenly with infrared or electric panels until it reaches its softening point (about 150–200 °C). For sheets thinner than 3 mm, single-side heating is usually adequate, while thicker sheets typically require double-sided heating to improve speed and uniformity.

Positioning

Transfer the softened sheet above the mold and clamp it securely in place.

Forming

Vacuum Forming

A vacuum pump is activated to extract the air between the mold and the plastic sheet. Once the air is evacuated, the sheet is drawn onto the mold surface, conforming precisely to its contours.

Vacuum forming process showing heated plastic sheet drawn over a mold to form a plastic case shell

Pressure Forming

The vacuum pump is activated first, drawing the heated plastic sheet tightly against the mold surface under negative pressure. Once the sheet is properly seated, high-pressure air is introduced from above, working together with the vacuum to press the material into the mold’s fine details.

Pressure forming process using vacuum and compressed air to shape heated plastic into detailed case shells

Cooling

Vacuum Forming

Cooling is achieved through the mold’s internal water channels or cooling passages, which gradually remove heat and allow the plastic to harden.

Pressure Forming

Cooling occurs through airflow using fans or by simply letting the part sit and harden.

Demolding

Release the vacuum or air pressure. Eject the part from the mold using mechanical ejectors.

Trimming

Remove excess material with CNC cutting, die punching, or manual trimming. Scrap material can be recycled into sheet production.

Note

  1. Venting holes (perforated mold plates) are essential in both processes to allow trapped air to escape and ensure proper sheet conformity.
  2. Thermoformed plastic case shells, with the same external dimensions, are generally thinner and lighter than injection-molded or blow-molded products (typically 1.5–6 mm).
  3. Pressure forming provides sharper details.
How to Mold a Plastic Case Step by Step?

Discuss Your Project

Benefits and Applications of Thermoforming

Thermoformed products offer an outstanding balance of durability, design flexibility, and cost-effectiveness. Capable of being produced in a vast range of sizes—from very large to minute—and in thicknesses from substantial to ultra-thin, this process enables exceptional versatility.

It is ideally suited for applications such as automotive parts, aircraft canopies, radomes, medical device housings, and thin-walled packaging for food and pharmaceuticals.

The products deliver reliable protection, accommodating complex shapes and varying material thicknesses while allowing for extensive customization in size, shape, surface texture, and branding.

Thermoforming Case vs Other Materials

+
Low

UNIT PRICE

MOLD COST

SHIPPING COST

PRODUCTION CYCLE

PROTECTION LEVEL

PORTABILITY

CUSTOMIZATION

ECO-FRIENDLINESS

High

Key Factors in Thermoforming Case Manufacturing

+

Cost-Effective Tooling
Thermoforming molds are significantly simpler and more economical to manufacture compared to injection molding, with tooling costs often as low as 25% of those for equivalent injection molds. This makes the process ideal for short runs and prototyping.

Material Versatility
Supports a wide range of thermoplastic materials in sheet or film form, including ABS, PC, PETG, PP, PE, PVC, and acrylics, allowing flexibility in material selection based on functional requirements.

Rapid Mold Fabrication
Low forming pressure enables the use of molds made from aluminum, composite materials, 3D-printed polymers, or even wood, considerably shortening lead time for mold production and modifications.

Adjustable Wall Thickness
Provides the capability to control material distribution and wall thickness within a single part through pre-stretching and material handling techniques.

High Production Efficiency
Short cycle times and quick mold transitions facilitate medium- to high-volume production runs with consistent output quality and minimal downtime.

Integrated Vacuum and Pressure Forming Options
Supports combination techniques using both vacuum and positive air pressure for improved detail replication, especially for deep-draw or complex geometries.

Scalable and Adaptable Process
Well-suited for both prototype and production volumes without major tooling adjustments, offering a seamless transition from development to mass manufacturing.

Your Submission Was Successful!

Working Hours:
● 9:00~18:00 from Monday to Friday (UTC+8)
● 20:00~5:00+1 (UTC-5)

We will get back to you within 1 business day.